Chopped Beam Walls Spruce/Fir/Pine type 4A | orginal chopped, brushed, edged, planed | 45-55 mm

Boards with original, hand-chopped surface (1st patina) cut from old beams or knitted walls or log walls type 4A, unnailed, cleaned, washed and lightly brushed. The boards are trimmed or also partly with original falling edge. The reverse side is rough sawn or levelled.

Length

falling from 100 to 500 cm, depending on availability, no fixed lengths possible.

Width

falling from 8 to 22 cm, main widths from 10 to 18 cm, no fixed widths possible

Thickness

approx. 30 to 35 mm or partly up to 50 mm

Colour

mixed from light brown-brown to light grey-grey

Surface

cleaned, washed, lightly brushed

Drying

Technically dried to approx. 12% ± 2%.

Longitudinal edges

trimmed in parallel or untrimmed with natural edge, end face blunt or raw not cut at an angle (see photos)

Back side

rough sawn or leveled

Note

You must always treat old wood against wood pests with wood preservative such as Arbezol Spezial or Borsalz before laying or further processing. We exclude any liability due to an infestation of wood pests.